Heavy Wall Entrances

Doors and Entrances

350/500 Heavy Wall™ Entrances

Medium Stile 350 and Wide Stile 500 Heavy Wall™ Entrances provide quality, durability and protection that lasts. They are designed for heavy-traffic areas such as schools, universities and office buildings and withstand constant motion and rigorous usage.

  • 3-1/2″ (88.9mm), or 5″ (127mm) sightline
  • 2″ (50.8mm) depth
  • 3/16″ (4.8mm) wall thickness
  • Non-thermal performance
  • High-traffic application
  • Medium or Wide Stile door designed for high-traffic applications such as schools, universities and office buildings
  • Door and frame have 3/16″ (4.8mm) walls throughout for added durability and strength
  • The door is 2″ (50.8mm) deep with a 6-1/2″ (165.1mm) bottom rail and 3-1/2″ (88.9mm) vertical stiles for the 350 Heavy Wall Entrance and 5″ (127mm) vertical stiles for the 500 Heavy Wall Entrance
  • Incorporates Kawneer’s standard welded corner design
  • Accepts glazing infills from 1/4″ to 1″ (6.4mm to 25.4mm)

To resist both lever arm and torsion forces that constantly act upon any door, the 350/500 Heavy Wall Entrance features four Sigma deep penetration and filet welds plus mechanical fastening at each corner.

Each door corner comes with a Limited Lifetime Warranty, good for the life of the door under normal use operation. It is transferable from building owner to building owner and is in addition to the standard two-year warranty covering every Kawneer door.

Kawneer’s Paneline™ panic device can be incorporated into Heavy Wall Entrances for crowded buildings that require quick emergency egress. Pressure on the push panel quickly releases the door and Paneline offers improved safety over a traditional crash bar device.

Kawneer offers a wide variety of entrance hardware to meet your specific job needs:

  • Pivots and Hinges
  • Locks and Latches
  • Exit Devices
  • Door Closers
  • Thresholds
  • Push/Pull
350/500 Heavy Wall™ Entrances - Architectural Detail Manual
4 MB
Product Selection Guide Standard Entrances
2 MB
350/500 Heavy Wall™ Entrances - Flyer
1 MB
Paneline® MEL (Motorized Electronic Latch) Exit Device Flyer
870 KB
Paneline® Concealed Rod Exit Device Flyer
844 KB
Entrance Hardware
2 MB
Entrance Hardware (Spanish)
2 MB
Florida Product Approval & Texas Dept. of Insurance Evaluation Documents
274 KB
350/500 Heavy Wall™ Entrances - Product Green Guide
191 KB
Anodized and Painted Aluminum Extrusions - EPD
765 KB
350/500 Heavy Wall™ Entrances - MTS
386 KB
Finishes Brochure
5 MB
Finishes Information - Architectural Detail Manual
238 KB
Anodize Finishes - Color Chart
82 KB
Liquid Paint - Color Chart - Permadize®
1 MB
Liquid Paint - Color Chart - Permafluor™
350 KB
Powder Paint - Color Charts - Permacoat™
127 KB
350/500 Heavy Wall™ Entrances - English
350/500 Heavy Wall™ Entrances - French
350/500 Heavy Wall™ Entrances - Spanish

Download All
350 HW Entrances, with Trifab 451 - 1" Standard Details
350 HW Entrances, with Trifab 450 - 1/4" Standard Details
500 HW Entrances, with Trifab 451 - 1" Standard Details
500 HW Entrances, with Trifab 450 - 1/4" Standard Details
350/500 HW Entrances, with Trifab 451 - 1" Heavy Details
350/500 HW Entrances, with Trifab 450 - 1" Heavy Details
350/500 HW Entrances, with Trifab 450 & 451 - 1/4" & 1"- Tormax Closer Options
350/500 HW Entrances - Misc. Details, Crossrail & Threshold Options
Download All

While most of our products are not hazardous in and amongst themselves, hazardous properties can develop when the product is altered through cutting, welding, and grinding.  Details on the specific hazards that can develop and the proper protective measures to use can be found in the SDSs.

Arconic’s SDS database provides PDF files of safety information on specific materials.  The SDS ID numbers (product code) and description for materials used in Kawneer products are listed below.

1405 – Kawneer Thermal Break Filled Extrusions
1385 – Kawneer Acrylic Paints
1386 – Kawneer Fluoropolymer Paints

1526 – Kawneer Bloomsburg Solvent Recovery Still Residuals

1387 – Painted Architectural Aluminum Extrusions
509 – Aluminum Extrusions, Anodized Aluminum Products


Search Arconic’s SDS database for safety information on specific materials.


Warranty Disclaimer TBC

Project Warranty Cover Sheet (English)
137 KB
Project Warranty Cover Sheet (French-Canadian)
137 KB
Project Warranty Cover Sheet Sample (English)
139 KB
Project Warranty Cover Sheet Sample (French-Canadian)
140 KB
Material & Workmanship - English
185 KB
Material & Workmanship - French
190 KB
Material & Workmanship Sample (English)
203 KB
Material & Workmanship Sample (French Canadian)
212 KB
Anodized Finishes Warranty - English
523 KB
Anodized Finishes Warranty - French
517 KB
Anodized Finishes Sample (English)
529 KB
Anodized Finishes Sample (French Canadian)
524 KB
Painted Finishes Warranty - English
557 KB
Painted Finishes Warranty - French
538 KB
Painted Finishes Sample (English)
565 KB
Painted Finishes Sample (French Canadian)
550 KB
Insulating Glass Warranty - English
498 KB
Insulating Glass Warranty - French
499 KB
Insulating Glass Sample (English)
502 KB
Insulating Glass Sample (French Canadian)
504 KB
Laminated Glass Warranty - English
122 KB
Laminated Glass Warranty - French
123 KB
Laminated Glass Sample (English)
126 KB
Laminated Glass Sample (French Canadian)
128 KB
Corrective Field Repairs (English)
154 KB
Corrective Field Repairs (French-Canadian)
152 KB